BH-HMS high temperature oil resistant heat shrink identification sleeve is made of cross-linked environmentally friendly polyolefin bombarded by high power electron beam with electronic accelerators to meet high end markets where highly reliable cable& wire identification is required.Which are used to identify wires and cables where exposure to organic fluids, especially oils, for long periods at elevated temperatures

BH-BOC branch-off clip it is casted by aluminum alloy which resists to high temperature and coating by high temperature paint on the surface, the middle toe is molding by EVA or PA hot melting adhesive. It is use together with the heat shrinkable tube as branching in the communication cable/railway signal cable joint connection, it could be divided into two, three and so on, to achieve a variety of cable perfect branch.

BH-FSP-R ribbon heat shrinkable multiple fiber optic splice protector is consist of cross linked polyolefin, hot fusion tubing and ceramic or quartz rod, keep optic transmission properties of optical fiber, provide strength and protection to multiple optical fiber splices.

BH-SB/BH-TB is premolded bellows boots applied for transformer and switchgear connections with the function of protection, insulating and sealing, it can also reduce the clearance between phase to phase, phase and ground as well. Such boots own outstanding behaviors for the weathering resistance and electrical property esp. in the wet conditions. Configuration 35-400mm2 at 7.2V/17.5kV for straight type insulating boots and 46-70mm2 up to 15kV for T type insulating boots.

BH-ICT 35kV plug-in type termination is applied for the connection to the transformer, switchgear,  switch unit etc. 35kV inner corn plug socket is suitable for the connection to GIS and effective sealing for the SF6. it can be used in door and out door applications without any maintenance. It is mainly composed of inner corn type epoxy insulating bushing and termination which is made of EPDM elastomer to guarantee the reliability for the long term working condition. 

BH-CS 250A S type screened connector, made of EPDM elastomer, is used for indoor application, the main body is composed of inner conductive layer,insulating layer and outer conductive layer, suitable for the connection of XLPE cables 8.7/15kV, 12/20kV to transformers, switchgears and other equipment with premolded separable connector.

BH-CTF-U 24kV 630A T type separable unscreened connector, made of EPDM elastomer, is used for indoor application, the main body is composed of inner conductive layer, insulating layer and outer conductive layer, suitable for the connection of XLPE cables 12/20kV to medium voltage equipment (transformers,switchgears, motors, etc. ) up to 24KV. 

BH-CTF-M 15kV 630A T type separable screened/unscreened connector, made of EPDM elastomer, is used for indoor application, the main body is composed of inner conductive layer, insulating layer and outer conductive layer, suitable for the connection of XLPE cables 8.7/15kV to medium voltage equipment (transformers,switchgears, motors, etc. ) up to 15KV. 

BH-CTF-301 35kV 630A T type separable screened connector, made of EPDM elastomer, is used for indoor application, the main body is composed of inner conductive layer, insulating layer and outer conductive layer, suitable for the connection of XLPE cables 26/35kV to medium voltage equipment (transformers, switchgears, motors, etc. ) up to 35KV. 

BH-CTF 630A T type separable screened connector, made of EPDM elastomer,is used for indoor application, the main body is composed of inner conductive layer,insulating layer and outer conductive layer, suitable for the connection of XLPE cables8.7/15kV, 12/20kV to medium voltage equipment (transformers, switchgears, motors, etc. ) up to 24KV.